SKU: 8033675803319

Sigma Handle Push Type ‘MAX’ Suits Series 3EM

$140.00

1 in stock

NO-MARK protection 15 mm pushing handle groove with Sigma MX14 for Sigma 3P3M and 3E4M

Code: ART 024M15X

08-SIGHM15 : 8033675803319

Tags: 15mm, 3EM, 8033675803319, ART024M15X, HANDLE, MAX, PUSH, SERIES 3, SIGMA

You may also like

Sigma '14U' Standard 12mm Scoring Wheel Suits UP Series 4 Cutters — Sigma '14U' Standard 12mm Scoring Wheel Suits UP Series 4 Cutters
$22.60
Standard Scoring Wheel , with 12mm Diameter – comes complete with Axle. Suits new Sigma “UP” Series Manual Tile Cutters Code: SIG-14U 14-SIWUP

Sigma '14C' Standard 16mm Scoring Wheel Suits the Klick-Klock Handle — Sigma '14C' Standard 16mm Scoring Wheel Suits the Klick-Klock Handle
$29.90
Sigma wheel & axle 16mm to suit Klick Klock handles.

Sigma '14C' Standard 16mm Scoring Wheel Suits the Klick-Klock Handle
$29.90
Sigma wheel & axle 16mm to suit Klick Klock handles.

Sigma Series 4 Pull Action Tile Cutter '4DU' 1030mm — Sigma Series 4 Pull Action Tile Cutter '4DU' 1030mm
$999.00
Pull Action Heavy Duty Tile Cutter with 1030mm cutting length. Fitted with a Calibrated Support that swivels from 0 to 45 degrees in both directions. Features a spring loaded cutting base at both rear and front of the cutter.

Cuts up to 17mm thick tiles

Able to cut 728 x 728mm tiles on the diagonal

Code: SIG-4DU 14-SIG4DU

Sigma Nylon Feet Protector Suit 24e/ae Art104033 — Sigma Nylon Feet Protector Suit 24e/ae Art104033
$11.50
Keep polished porcelain and glazed tile looking clean during the snap. The Sigma NO-MARK plastic breaker foot (104033) is an OEM replacement that installs on Sigma pulling handles 24E and 24AE, helping reduce visible marks while maintaining consistent breaking pressure.
Features

NO-MARK contact surface helps reduce scuffs on delicate finishes (polished/gloss).

Restores clean snapping when the original foot is worn, gouged, or flattened.

Sigma spare part for correct fit on supported handles/cutters.

Sold individually—easy to keep a spare in the trailer.

Simple replacement to reduce downtime on the jobsite.

25-sipf

Sigma Plate Spring D14 X H33 — Sigma Plate Spring D14 X H33
$1.70
Sigma Plate Spring Replacement Part. 11-sspring

Sigma Sliding Square, Suit 2G — Sigma Sliding Square, Suit 2G
$30.75
Suit 2G tile cutters.

Sigma Handle Pull 8mm, Suit 5a-b/3a-b — Sigma Handle Pull 8mm, Suit 5a-b/3a-b
$160.00
Sigma Complete Handle to suit 5A-B & 3A-B Tile Cutters.

Sigma Wheel 14t Titanium 12mm Bat — Sigma Wheel 14t Titanium 12mm Bat
$27.00
Titanium Coated Scoring Wheel , with 12mm Diameter – comes complete with Axle. Suits new Sigma “UP” Series Manual Tile Cutters 14-siwt

Rubi Manual Tile Cutter Wheel 08mm Suit Tx-Tz models — Rubi Manual Tile Cutter Wheel 08mm Suit Tx-Tz models
$41.85
RUBI have the most complete selection of interchangeable scoring wheels on the market for TX/TX-N and the TZ Models.

Rubi Manual Tile Cutter Wheel 08mm Suit Tx-Tz models
$41.85
RUBI have the most complete selection of interchangeable scoring wheels on the market for TX/TX-N and the TZ Models.

Sigma Non-Marking Plastic Feet 2A/2B — Sigma Non-Marking Plastic Feet 2A/2B
$12.00
Sigma Plastic Non Marking Feet for 2A/2B Handles

Sigma Sliding Square for Series 3 Cutters — Sigma Sliding Square for Series 3 Cutters
$36.85
Sigma Sliding Square to suit 3A, B, C, D & EK Tile Cutters

Sigma Handle ART24AE, suit Sigma Manual Tile Cutters — Sigma Handle ART24AE, suit Sigma Manual Tile Cutters
$140.00
Replacement handle for Sigmas with 10mm bar - usually ART3C, ART3D, ART4A