SKU: 14-SIGH24EK

Sigma Handle 3EK Klick Klock 15mm BAT Trims

$185.00

1 in stock

To suit 3EK Tile Cutter.

An Ergonomic Die Cast Aluminium Handle complete with Scoring Wheel with Klick Klock reversible style to enable push or pull cutting

14-sigh24ek

Tags: 15mm, 3EK, BAT TRIMS, HANDLE, KLICK, KLOCK, SIGMA, TILE CUTTER

You may also like

Sigma Series 4 “UP” Pull Type Handle — Sigma Series 4 “UP” Pull Type Handle
$251.45
Sigma Series 4 “UP” Pull Type Handle Complete Ergonomic Die Cast Aluminium Handle complete with Scoring Wheel for new Pull Style “Up” style Series 4 range of Tile Cutters 11-SIG24U

Sigma Wheel ART14C Klick Klock 16mm — Sigma Wheel ART14C Klick Klock 16mm
$29.90
Sigma wheel & axle 16mm to suit Klick Klock handles.

Sigma Wheel ART14C Klick Klock 16mm
$29.90
Sigma wheel & axle 16mm to suit Klick Klock handles.

Sigma Tile Cutter 4en - 1250mm — Sigma Tile Cutter 4en - 1250mm
$1,550.00
Push Action Heavy Duty Tile Cutter with 1250mm cutting length. Fitted with a Calibrated Support that swivels from 0 to 45 degrees in both directions. Features a spring loaded cutting base at both rear and front of the cutter.

Cuts up to 19mm thick tiles

Able to cut 884 x 884mm tiles on the diagonal

14-sig4en

Sigma Wheel 14u Standard 12mm Up Type — Sigma Wheel 14u Standard 12mm Up Type
$22.60
Standard Scoring Wheel , with 12mm Diameter – comes complete with Axle. Suits new Sigma “UP” Series Manual Tile Cutters 14-siwup

Sigma Plate Spring D14 X H33 — Sigma Plate Spring D14 X H33
$1.70
Sigma Plate Spring Replacement Part. 11-sspring

Sigma Nylon Feet Protector Suit 24e/ae Art104033 — Sigma Nylon Feet Protector Suit 24e/ae Art104033
$11.50
Keep polished porcelain and glazed tile looking clean during the snap. The Sigma NO-MARK plastic breaker foot (104033) is an OEM replacement that installs on Sigma pulling handles 24E and 24AE, helping reduce visible marks while maintaining consistent breaking pressure.
Features

NO-MARK contact surface helps reduce scuffs on delicate finishes (polished/gloss).

Restores clean snapping when the original foot is worn, gouged, or flattened.

Sigma spare part for correct fit on supported handles/cutters.

Sold individually—easy to keep a spare in the trailer.

Simple replacement to reduce downtime on the jobsite.

25-sipf

Sigma Tilecutter Mosaic Kit Suit 3 L — Sigma Tilecutter Mosaic Kit Suit 3 L
$119.20
Hardened Scoring Wheel made of Tungsten, with 12mm Diameter – comes complete with Axle. Suitable for cutting Vitrified Tiles 11-sigmk

Sigma Handle - 24AE — Sigma Handle - 24AE
$112.45
Sigma Handle for tile cutters. Suits 4A, 4B, 3C and 3D.

Sigma Clamping Knob, Suit 2A3 & 2B3 — Sigma Clamping Knob, Suit 2A3 & 2B3
$21.50
Sigma Clamping Knob to suit 2A3 & 2B3 Tile Cutters.

Sigma Non-Marking Plastic Feet 2A/2B — Sigma Non-Marking Plastic Feet 2A/2B
$12.00
Sigma Plastic Non Marking Feet for 2A/2B Handles

Sigma Sliding Square for Series 3 Cutters — Sigma Sliding Square for Series 3 Cutters
$36.85
Sigma Sliding Square to suit 3A, B, C, D & EK Tile Cutters

Sigma Handle ART24AE, suit Sigma Manual Tile Cutters — Sigma Handle ART24AE, suit Sigma Manual Tile Cutters
$140.00
Replacement handle for Sigmas with 10mm bar - usually ART3C, ART3D, ART4A