Designed for the anti-slip protection of all tile and stone surfaces. This is not a surface coating and will not alter the natural look. All surfaces treated are less slippery.
Lithofin MN Easy-Care is a high-yielding cleaning and maintenance concentrate, which contains active maintenance components and mildly alkaline cleaning agents based on natural soaps.
Provides superior protection to the toughest porous surfaces such as sandstone, bluestone, travertine, concrete, terracotta, slate, grout and other porous masonry surfaces.
High Gloss Sealer is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable high-sheen finish, eliminating conventional two-step methods utilising a sealer and finish. High Gloss Sealer allows moisture vapor transmission and is unaffected by ultra-violet light.
Seal & Finish Low Sheen Sealer is specially formulated using a blend of water-based acrylic polymers that provides both a stain resistant surface seal and a durable low-sheen finish, eliminating conventional two-step methods utilizing a sealer and finish.
STONETECH® Epoxy Grout Haze & Coating Stripper is a fast-acting, water-based gel designed to safely remove tough epoxy grout haze and various coatings from vertical and horizontal surfaces.
Penetrating Sealer is an economical, no sheen, water based penetrating / impregnating sealer for all porous interior & exterior natural stone (including around salt water swimming pools). Formulated to provide excellent protection. Perfect for very porous stone and tile. An ideal sealer for concrete, sandstone & brick. Last up to 5 years.
Aqua Mix® ProBlock – Pre Sealer for porous stone & tile is an economical, natural look, breathable sealer. It is a water based penetrating pre sealer designed to resist staining caused by water soluble minerals (including picture framing effect) which are normally absorbed through the back of the stone during installation. It also helps resist efflorescence migration. ProBlock is not an adhesive bond breaker.
Grout Release is a temporary, water soluble, pre-grout coating. It provides protection against grout and mortar staining and eases grout clean up. Ideal for porous textured material such as; Sandstone, concrete pavers & bricks.
Poultice Stain Remover is a dual purpose, non-acidic stain remover. It is an absorptive clay that is designed to remove deep-set oil and grease stains without scrubbing. It is also a fine abrasive cleaning powder that removes surface stains and grout haze. Very effective on all natural stone and tile surfaces.
A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Stain-Stop contains high quality water and oil resistant components based on alkoxysilanes.