SKU: 07-DBCSI

Diamond Blade 300mm (12″) J-Slotted Edge Sigma

$385.00

Genuine Sigma J Slot blades which are designed for wet use.

1 in stock

For use:

Ceramic and Glass
Vitrified and Porcelain
Granite and Bluestone
Marble and Slate

Code: SI-ART74C

07-DBCSI

Tags: 12″, 300mm, BLADE, CONRIM, CUTTING, DIAMOND, J-SLOT, SI-ART74C, SIGMA

You may also like

Diamond Blade 180mm (7") Turbo — Diamond Blade 180mm (7") Turbo
$44.95
Turbo blades have a serrated continuous rim — balance of speed and clean finish, best for masonry and light concrete with cleaner edges than what a segmented edge gives. 46-DBT180

Diamond Blade 180mm (7") Turbo
$44.95
Turbo blades have a serrated continuous rim — balance of speed and clean finish, best for masonry and light concrete with cleaner edges than what a segmented edge gives. 46-DBT180

Diamond Blade 125mm (5") Super Thin Mesh — Diamond Blade 125mm (5") Super Thin Mesh
$25.95
This design provides efficient and precise cutting with minimal chipping, ideal for porcelain, ceramic, granite, and marble.

60mm Mini Diamond Blade Red Turbo Edge with M14 Thread — 60mm Mini Diamond Blade Red Turbo Edge with M14 Thread
$29.95

Ideal for grout removal and pipe cutting

Diamond Blade 100mm (4") Turbo Reinforced — Diamond Blade 100mm (4") Turbo Reinforced
$24.00
Turbo reinforced blade cuts stone, concrete, re-inforced concrete, brick and steel.

Diamond Blade 125mm (5") Vacuum Brazed U Slot — Diamond Blade 125mm (5") Vacuum Brazed U Slot
$28.00
The vacuum brazing allows the grit to be in constant contact with the material to produce a very fast and effective cut. Suitable for cutting concrete, rubber, fibreglass, wood, plastic, ducting, quarry slabs, Indian sandstone and non-ferrous metal 46-DB5VB

Diamond Blade 125mm (5") for Cutting and Grinding Glass — Diamond Blade 125mm (5") for Cutting and Grinding Glass
$30.95
Suitable for cutting glass, porcelain tiles and slabs.

Diamond Milling Bit 25mm — Diamond Milling Bit 25mm
$59.30
#60 Grit for use with an M14 angle grinder.

Diamond Blade 125mm (5") Turbo Bosch — Diamond Blade 125mm (5") Turbo Bosch
$26.00
X-LOCK™ is a new quick-change system for Angle Grinders developed by BOSCH®. X-LOCK™ enables users to switch angle grinder accessories with just one click! The X-shaped interface on the grinders head matches with the accessory permitting easy and effortless mounting. The X-LOCK™ system also permits backwards compatibility and can be fitted to traditional Angle Grinders with a 22.2 mm (7/8") bore capacity. This BOSCH® X-LOCK™ Best for Ceramic Extraclean Turbo Diamond Blade provides extraclean cuts in ceramic materials. Its turbo rim achieves accurate results in all varieties of tiles while also providing an extended life. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards. The BOSCH® diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting ceramics, porcelain and fine stoneware. 46-DBT5BOSCH

Arbortech Mini Grinder Diamond Disc 54mm x 1.2mm — Arbortech Mini Grinder Diamond Disc 54mm x 1.2mm
$35.00
54mm x 1.2mm Mini Diamond Disc.

Diamond Conical Router Bit 38mm — Diamond Conical Router Bit 38mm
$30.50
To be used for chamfering, enlarging, shaping and or trimming holes.

Diamond Blade 100mm (4") OTEC Contractor Turbo Edge — Diamond Blade 100mm (4") OTEC Contractor Turbo Edge
$19.95
Thin turbo diamond blade designed specifically with the contractor in mind. Ideal for ceramic tiles, marble, porcelain and vitrified tiles.

Diamond Blade 105mm (4") White Lightning Turbo — Diamond Blade 105mm (4") White Lightning Turbo
$43.15
This blade requires air for a dry coolant, or water as a wet coolant.